Applying Your Arrow Wraps
CAUTION: NEVER SHOOT A DAMAGED ARROW
Only arrows in good condition should ever be used. Never shoot an arrow that is bent, cracked, split, splintering, or has any other signs of damage. Never shoot an arrow that has impacted a solid object. Arrow cresting wraps are for cosmetic purposes only and are not to be used to repair damaged shafts.
CAREFULLY INSPECT EACH ARROW BEFORE SHOOTING IT!
EASY APPLICATION FOR REGULAR WRAPS
We suggest you use a flat, semi-soft surface.
A foam backed mouse pad works great.
1. Prep the arrow by washing it with warm, soapy water. Rinse well and let air dry.
2.Remove all wrap backing and place the wrap face down (adhesive up) on a flat, semi soft surface.
3. Position the shaft and align it with the edge of the wrap. Slide the shaft toward the wrap until light contact is made.
4. Using steady downward pressure, roll shaft away from you over the wrap.
Now you are ready to fletch!
Only arrows in good condition should ever be used. Never shoot an arrow that is bent, cracked, split, splintering, or has any other signs of damage. Never shoot an arrow that has impacted a solid object. Arrow cresting wraps are for cosmetic purposes only and are not to be used to repair damaged shafts.
CAREFULLY INSPECT EACH ARROW BEFORE SHOOTING IT!
EASY APPLICATION FOR REGULAR WRAPS
We suggest you use a flat, semi-soft surface.
A foam backed mouse pad works great.
1. Prep the arrow by washing it with warm, soapy water. Rinse well and let air dry.
2.Remove all wrap backing and place the wrap face down (adhesive up) on a flat, semi soft surface.
3. Position the shaft and align it with the edge of the wrap. Slide the shaft toward the wrap until light contact is made.
4. Using steady downward pressure, roll shaft away from you over the wrap.
Now you are ready to fletch!
EASY APPLICATION TRADITIONAL CRESTING WRAPS
We suggest you use a flat, semi-soft surface.
A foam backed mouse pad works great.
1. Prep the arrow by washing it with warm, soapy water. Rinse well and let air dry.
2. Place the wrap face down and carefully peel the paper backing layer from the wrap and transfer tape while leaving the wrap and transfer tape flat. (Only the colored wrap and the transfer layer should remain.)
3. With the wrap and transfer tape placed sticky side up on the mouse pad, hover the arrow shaft above the wrap and align it with the edges of the wrap. Lower the shaft toward the wrap until light contact is made.
4. Using steady downward pressure, CAREFULLY roll shaft over the wrap. Avoid allowing the transfer tape to overlap and stick to itself. Remove the clear transfer layer by peeling it off slowly, starting at the corner. Only the colored wrap will remain on the arrow shaft.
Now you are ready to fletch!
EASY REMOVAL
Soak in hot water for about 5 minutes and peel off the arrow wrap.
OR
Heat up the wrap with a hair dryer and peel it off.
NEVER USE HARSH CHEMICALS, KNIVES OR OTHER SHARP OBJECTS TO REMOVE CRESTING WRAPS.
We suggest you use a flat, semi-soft surface.
A foam backed mouse pad works great.
1. Prep the arrow by washing it with warm, soapy water. Rinse well and let air dry.
2. Place the wrap face down and carefully peel the paper backing layer from the wrap and transfer tape while leaving the wrap and transfer tape flat. (Only the colored wrap and the transfer layer should remain.)
3. With the wrap and transfer tape placed sticky side up on the mouse pad, hover the arrow shaft above the wrap and align it with the edges of the wrap. Lower the shaft toward the wrap until light contact is made.
4. Using steady downward pressure, CAREFULLY roll shaft over the wrap. Avoid allowing the transfer tape to overlap and stick to itself. Remove the clear transfer layer by peeling it off slowly, starting at the corner. Only the colored wrap will remain on the arrow shaft.
Now you are ready to fletch!
EASY REMOVAL
Soak in hot water for about 5 minutes and peel off the arrow wrap.
OR
Heat up the wrap with a hair dryer and peel it off.
NEVER USE HARSH CHEMICALS, KNIVES OR OTHER SHARP OBJECTS TO REMOVE CRESTING WRAPS.
Applying Your Decals
1. Clean: Wipe clean the window or surface you are applying the decal to with a mild cleaner. Allow to dry.
2. Peel: Carefully peel off the backing layer from the decal. Only the vinyl and the clear transfer tape should remain,
3. Apply: Place your Decal on the window. Use a credit card to rub and smooth the decal onto the window.
4. Remove: Now remove the clear transfer layer by peeling it off, starting at the corner. Only the vinyl decal should remain.
Note: Apply stickers at room temperature. Avoid application in extreme hot and cold.
2. Peel: Carefully peel off the backing layer from the decal. Only the vinyl and the clear transfer tape should remain,
3. Apply: Place your Decal on the window. Use a credit card to rub and smooth the decal onto the window.
4. Remove: Now remove the clear transfer layer by peeling it off, starting at the corner. Only the vinyl decal should remain.
Note: Apply stickers at room temperature. Avoid application in extreme hot and cold.